ThermRite Ltd
36m² ThermRite SpiderFix12 Low-Profile Underfloor Heating Kit
36m² ThermRite SpiderFix12 Low-Profile Underfloor Heating Kit
Couldn't load pickup availability
SKU:SP12-36
The 36m² ThermRite SpiderFix12 Low-Profile Underfloor Heating Kit is a water-based UFH package for a kitchen-diner or adjoining ground-floor rooms. It uses SpiderFix12 self-adhesive pipe fixing panels to secure 12mm heating pipe in a slim 16.5mm panel before the system is encapsulated with a suitable levelling compound. Suited to low-profile upgrades where multiple heating circuits may be needed.
SpiderFix12 is intended to form part of a prepared, covered floor build-up. The package combines the panel allowance with 12mm pipe, a 3-port manifold setup, connection parts and a Grundfos pump and mixing unit.
Key features of this 36m² SpiderFix12 water UFH kit
- Low-profile retrofit panels: 16.5mm panel height for 12mm pipe; the finished floor build-up is higher after levelling and floor covering.
- Simple pipe retention: self-adhesive backing, interlocking panel edges and integrated cutting grooves for layout flexibility.
- Flexible circuit design: the panels allow various pipe centres, including 100mm and 150mm, subject to the specified heat output and supplied pipe length.
- Manifold and pump package: 3-port manifold and matching connections, plus a Grundfos UPM3 circulation and temperature-control unit.
What's included in the 36m² kit?
| Component | Included quantity / detail |
|---|---|
| SpiderFix12 pipe-fixing panels | 50 panels × 0.72m² each (1200 × 600 × 16.5mm; nominal area allowance) |
| 12mm multilayer barrier UFH pipe | 240 metres (3 × 80m coils) |
| Pipe layout guidance | Layout guidance for the SpiderFix12 pipe-fixing system |
| Pipe reaming tool | 1 deburring and chamfering tool |
| Connector cores | 6 compatible 12mm connector cores |
| Manifold and control components | 3-port manifold configuration |
| Grundfos UPM3 pump pack and temperature control unit | 1 complete pump / temperature-control assembly |
SpiderFix12 technical specifications
| Specification | Details |
|---|---|
| Nominal coverage | Up to 36m² before allowing for site cuts and waste |
| Panel size and height | 1200 × 600mm; 16.5mm high; 0.72m² per panel |
| Compatible heating pipe | 12mm outside diameter multilayer UFH pipe |
| Panel fixing | Self-adhesive with interlocking connectors, over a suitable prepared subfloor |
| Manifold size | 3 ports |
| Intended covering | Compatible flexible fibre-reinforced self-levelling compound |
| Typical use | Kitchen-diner or adjoining ground-floor rooms |
Installation and design guidance
Prepare a clean, sound and suitable subfloor, fix and connect the panels, then press the 12mm pipe into the designed routes. Pressure-test the pipework before covering it with an approved flexible fibre-reinforced self-levelling compound. Allow for the compound's required coverage above the panels and the chosen final floor finish. Levelling compound, primer, insulation, flooring and room thermostats are not included unless separately specified.
If the design serves more than one room, circuit routing and thermostat zoning should be planned separately from the overall floor-area allowance.
To complete the controls package, explore ThermRite thermostats and underfloor heating controls. You can also compare SpiderFix panels and other castellated systems if your subfloor or pipe diameter calls for a different approach.


