ThermRite PRO Overlay Underfloor Heating Kits – 16mm Panels
16mm EPS400 foil-faced panels with pipe laid at 120mm centres. The 16mm panel system is designed for strong heat output and minimal floor height increase.
Explore our systems
16mm EPS400 foil-faced panels with pipe laid at 120mm centres. The 16mm panel system is designed for strong heat output and minimal floor height increase.
20mm EPS400 foil-faced panels with pipe laid at 150mm centres. The 20mm panel system is designed for strong heat output suitable for a range of floor finishes.
WATER UNDERFLOOR HEATING • COMPLETE OVERLAY SYSTEMS
Discover ThermRite PRO Overlay underfloor heating kits, designed to provide efficient warm water heating where traditional in-screed systems may not be practical. Ideal for suitable renovations, extensions and retrofit projects, our PRO systems combine routed, foil-faced EPS400 panels with water underfloor heating pipe in a low-profile floor construction.
Choose between our 16mm PRO Overlay system using 12mm pipe at 120mm centres, or our 20mm PRO Overlay system using 16mm pipe at 150mm centres. Both offer a practical alternative to traditional screeded underfloor heating installations.
Both systems use high-density EPS400 routed panels with a bonded aluminium foil layer to help distribute heat. The main differences are panel thickness, pipe diameter and pipe spacing.
| Specification | PRO 16mm | PRO 20mm |
|---|---|---|
| Panel thickness | 16mm | 20mm |
| Pipe diameter | 12mm | 16mm |
| Pipe spacing | 120mm centres | 150mm centres |
| Panel construction | Foil-faced EPS400 | Foil-faced EPS400 |
| Listed kit sizes | 9–115m² | 20–180m² |
| Main advantage | Minimum panel height | Larger pipe diameter |
The best choice depends on available floor height, room heat loss, circuit lengths, floor finish and the intended heating-water temperature. Neither panel thickness nor pipe spacing alone determines the final heat output.
Slim 16mm and 20mm panels help minimise the additional height required when installing water underfloor heating over a suitable subfloor.
High-density EPS400 panels feature a bonded aluminium foil layer to help transfer and distribute heat across the floor surface.
Suitable for a range of compatible tile, vinyl, wood and laminate floor constructions when installed using the correct preparation and covering method.
ThermRite PRO complete kits bring together the principal components for a water underfloor heating installation. Exact components and quantities depend on the selected panel system and kit size.
16mm or 20mm EPS400 foil-faced panels with pre-routed pipe channels.
12mm pipe for PRO 16mm or 16mm pipe for PRO 20mm, supplied according to kit requirements.
Manifold and connection components appropriate to the heating circuits in the chosen kit.
Pump and temperature control components where specified in the selected kit.
Please check each individual product listing for exact kit contents. Panel adhesive, primer, levelling compounds, floor coverings, thermostats and heat-source connections may be required separately.
PRO Overlay systems are installed above a suitable existing floor structure rather than embedding the heating pipes in a traditional thick screed. The required floor preparation and covering layers depend on the substrate and chosen floor finish.
Check that the existing floor is suitable, stable and level. Prepare and fix the panels using the method specified for the intended flooring system.
Fit the specified 12mm or 16mm pipe into the routed grooves. Connect the circuits to the manifold and pressure-test the system.
Install any required cover boards, preparation layers or levelling compound before laying the compatible finished floor.
Important: 16mm and 20mm refer to panel thickness only. The total finished floor height also includes fixing materials, any required preparation layers and the floor covering.
Add water underfloor heating to suitable existing floors where build-up height is limited.
Suitable for kitchens, living areas, extensions and room refurbishment projects.
Useful where door thresholds or existing floor levels make a thicker heating system impractical.
Unsure whether the 16mm or 20mm PRO system is best for your project? Our team can help with panel selection, floor construction and underfloor heating requirements.
Contact the ThermRite Team →