EXPLORE OUR COLLECTIONS

Collection: SpiderFix Panels & Castellated Panels

4 products

SpiderFix Panels & Castellated Underfloor Heating Panels

Discover our range of SpiderFix panels, castellated underfloor heating panels and low-profile pipe fixing systems at ThermRite Shop. Designed for water underfloor heating installations, these panels securely retain heating pipe, simplify installation and help maintain accurate pipe spacing before the application of screed or self-levelling compound.

Our range includes SpiderFix12 panels for 12mm pipe, SpiderFix16 panels for 16mm pipe, and traditional 15mm and 20mm castellated floor panels. Whether you are installing underfloor heating in a renovation, extension or new-build property, these systems provide a practical solution for efficient pipe installation and consistent heat distribution.

Suitable for professional installers and DIY renovation projects, our pipe fixing panels are ideal for low-profile underfloor heating, retrofit systems and traditional screeded floor constructions.

Which SpiderFix or Castellated Panel Should I Choose?

Choosing the correct underfloor heating panel depends on your pipe diameter, available floor height, subfloor construction and the screed or levelling compound being used. Compare our available systems below to find the most suitable option for your installation.

Panel Pipe Size Panel Height Best Application Shop
SpiderFix12 12mm 16.5mm Low-profile retrofit UFH and renovation projects using self-levelling compound. View Panel
SpiderFix16 16mm 20mm Low-profile UFH installations requiring larger diameter pipe and flexible pipe spacing. View Panel
15mm Castellated Panel 12mm 15mm Low-profile screeded installations with self-adhesive fixing and integrated screed holes. View Panel
20mm Castellated Panel 16mm 20mm Traditional screeded underfloor heating installations over suitable insulation and subfloors. View Panel

SpiderFix12 vs SpiderFix16 – What's the Difference?

ThermRite SpiderFix panels are low-profile, self-adhesive pipe retention systems designed for fast installation of water underfloor heating. Both panels are manufactured from 100% recycled injection-moulded plastic and incorporate interlocking connectors and integrated cutting grooves.

SpiderFix12 – 16.5mm Panel for 12mm Pipe

The SpiderFix16 underfloor heating panel is designed for 12mm pipe installations where minimising floor build-up is important. Its 16.5mm profile makes it particularly suitable for renovation and retrofit projects.

  • 16.5mm panel height for low-profile UFH installations.
  • Suitable for 12mm outside diameter underfloor heating pipe.
  • Panel dimensions of 1200mm x 600mm, providing 0.72m² coverage.
  • Self-adhesive backing for installation onto suitable prepared surfaces.
  • Interlocking connectors for quick panel alignment.
  • Flexible pipe spacing options to suit the heating design.
  • Integrated 50mm cutting grooves for easier trimming.
  • Designed for encapsulation with a suitable flexible fibre-reinforced self-levelling compound.

SpiderFix16 – 20mm Panel for 16mm Pipe

The SpiderFix20 underfloor heating panel accommodates standard 16mm underfloor heating pipe, making it a practical choice for larger rooms, extensions and retrofit installations where a 16mm pipe system is specified.

  • 20mm panel height designed for 16mm UFH pipe.
  • Panel dimensions of 1200mm x 600mm, providing 0.72m² coverage.
  • Self-adhesive backing for straightforward fixing.
  • Interlocking panel edges for consistent installation.
  • Flexible pipe spacing to accommodate different heating layouts.
  • Integrated cutting grooves for installation around obstacles.
  • Manufactured from 100% recycled plastic.
  • Suitable for encapsulation using an approved self-levelling compound.

Which should you choose? SpiderFix12 is suitable for projects requiring 12mm pipe and a particularly shallow floor build-up. SpiderFix16 is intended for installations using larger 16mm pipe. Final selection should be based on the room's heat loss, pipe circuit design, floor construction and available finished floor height.

Key Benefits of SpiderFix & Castellated UFH Panels

Low-Profile Underfloor Heating

With panel heights ranging from 15mm to 20mm, our pipe retention systems are particularly useful when installing water underfloor heating in existing properties where finished floor height needs careful consideration. Additional screed or levelling compound and the selected floor finish must also be allowed for.

Fast & Secure Pipe Installation

The raised castellations securely grip the underfloor heating pipe, reducing the requirement for individual pipe fixing clips. SpiderFix panels also feature a self-adhesive backing and interlocking connectors, helping reduce installation time and simplify pipe positioning.

Flexible Pipe Spacing

SpiderFix panels accommodate multiple pipe spacing configurations, including 100mm and 150mm centres, subject to the heating design. Accurate pipe spacing is important for achieving the required heat output and maintaining consistent floor temperatures.

Suitable for Retrofit & New-Build Projects

These underfloor heating panels can be incorporated into suitably designed installations over concrete, timber subfloors and compatible insulation boards. Subfloor preparation, fixing method and the choice of screed or levelling compound should always follow the relevant product installation instructions.

Efficient Heat Transfer

Encapsulating heating pipe within an appropriate screed or levelling compound creates a continuous heated layer, allowing warmth to transfer through the selected floor covering. Correct installation and adequate insulation beneath the heating system are important for efficient performance.

SpiderFix Panels vs Traditional Castellated Panels

Both systems secure underfloor heating pipe before screeding or levelling, but they offer different installation features.

Feature SpiderFix Panels Traditional Castellated Panels
Pipe Retention Integrated pipe gripping profiles Raised castellated studs
Pipe Compatibility 12mm or 16mm, depending on panel 12mm or 16mm, depending on panel
Installation Self-adhesive backing and interlocking connectors Panel-specific fixing methods; selected models are self-adhesive
Pipe Spacing Flexible spacing configurations Pre-formed spacing positions
Floor Covering Suitable levelling compound before the specified floor finish Compatible screed system before the specified floor finish
Best Application Low-profile renovations, retrofits and overlay installations Traditional screeded systems and suitable low-profile projects

Installing SpiderFix Underfloor Heating Panels

SpiderFix systems are designed to make installing water underfloor heating straightforward. A typical installation follows these stages:

  1. Prepare the subfloor: Ensure the surface is structurally sound, clean, dry, level and suitable for the chosen installation system. Apply any required primer or surface preparation.
  2. Position the panels: Remove the protective backing and secure the self-adhesive SpiderFix panels to the prepared subfloor. Connect adjoining panels using the integrated interlocking clips.
  3. Install the pipework: Press the correct 12mm or 16mm underfloor heating pipe into the panel retention profiles at the specified pipe centres, following the designed circuit layout.
  4. Pressure test: Complete the appropriate pipework pressure test before covering the system.
  5. Apply levelling compound: Encapsulate the pipe and panels using an approved flexible fibre-reinforced self-levelling compound, following the specified minimum cover depth and application requirements.
  6. Install the floor finish: Once the levelling compound has cured sufficiently, install the compatible floor covering in accordance with the relevant manufacturer's guidance.

Important: The panel height is not the total finished floor build-up. The required depth of compound above the panels, any substrate preparation and the final floor covering must be considered. Always follow the panel and screed manufacturer's instructions.

Frequently Asked Questions About SpiderFix & Castellated Panels

What are SpiderFix underfloor heating panels?

SpiderFix panels are low-profile plastic pipe fixing panels designed for water underfloor heating installations. They securely retain heating pipe before the application of suitable self-levelling compound, helping installers maintain accurate pipe spacing without separate pipe clips.

What is the difference between SpiderFix12 and SpiderFix16?

SpiderFix12 has a 16.5mm panel height and accommodates 12mm underfloor heating pipe. SpiderFix16 has a 20mm panel height and is designed for 16mm pipe. Both feature self-adhesive backing, interlocking connectors and flexible pipe spacing options.

Do SpiderFix panels require pipe fixing clips?

No. SpiderFix panels feature integrated pipe retention profiles that hold compatible underfloor heating pipe securely in position. Separate pipe fixing clips are not normally required within the panels.

How much floor area does a SpiderFix panel cover?

Both SpiderFix12 and SpiderFix16 measure 1200mm x 600mm, providing a nominal coverage of 0.72m² per panel. Allow additional material for cuts and wastage when calculating quantities.

Can SpiderFix panels be installed over existing floors?

Yes, SpiderFix panels can be used in suitable retrofit installations over prepared concrete, structurally sound suspended timber floors and compatible insulation boards. Subfloor stability and adhesion requirements must be checked before installation.

Do SpiderFix panels require self-levelling compound?

Yes. SpiderFix systems are designed to be encapsulated with a compatible flexible fibre-reinforced self-levelling compound. The required depth will depend on the compound specification, panel design, subfloor and intended floor finish.

Can tiles be installed over SpiderFix panels?

Tiles may be installed over a SpiderFix system once an appropriate levelling compound has been applied and cured, provided the complete floor construction is suitable for tiling. Tiles should not be bonded directly onto exposed SpiderFix pipe retention panels.

What is the difference between castellated panels and routed UFH boards?

Castellated panels retain heating pipe within raised profiles before screed or levelling compound is applied. Routed overlay boards feature pre-formed channels for heating pipe and may use aluminium heat diffusion layers. The correct system depends on the subfloor, available height and selected floor finish. Explore our underfloor heating overlay boards for alternative installation options.

Are SpiderFix panels suitable for heat pump underfloor heating systems?

Yes. SpiderFix pipe retention panels can form part of a water underfloor heating system connected to a suitable heat pump, provided the heating system is correctly designed. Heat output depends on factors including pipe spacing, water temperature, floor construction and the final covering.

Which panel is best for low-profile retrofit underfloor heating?

SpiderFix16 and the 15mm castellated panel are options where 12mm pipe and minimal floor build-up are required. SpiderFix20 provides an alternative for systems designed around 16mm pipe. The best choice depends on the required heat output, floor structure and total available installation height.

Shop Underfloor Heating Panels & Accessories

Complete your water underfloor heating installation with compatible pipe, manifolds and installation accessories from ThermRite Shop. Our range includes specialist solutions for low-profile renovations, screeded floors and modern heating systems.

Need help choosing the correct panel? ThermRite can assist with selecting suitable underfloor heating components based on your floor construction, pipe requirements and installation plans.